Optical investigation of the heat transfer from a rotating cylinder in a cross flow

The heat transfer from a rotating cylinder in an air-cross flow was investigated by purely optical measuring techniques. Flow velocities were measured by a two-dimensional LDV both in the vicinity of the cylinder and in the boundary layer. A new optical device based on light-deflection in a temperature field was developed to examine local temperature gradients in the boundary layer of the rotating cylinder. Finally, a Michelson-interferometer was installed to produce real-time pictures of isothermal lines around the heated cylinder. The impact of rotation on flow patterns, boundary layer behaviour and heat transfer could be clearly identified. It appears that the velocity-ratio acts like an independent parameter, in that flow patterns correspond to this dimensionless number. Furthermore, it seems that rotation dominates over cross flow, both fluid-dynamically and thermally above = 2.This work was carried out at the University of the Federal Armed Forces in Munich/Germany.     

圆柱绕流的非线性动力学

本文利用非线性动力学的概念和方法来研究粘性不可压缩流体的二维圆柱绕流问题．计算了定常流失稳以及出现混沌的临界雷诺数，并估计了混沌解的一些统计特征．     

多层电磁弹性圆柱壳内波的轴向传播

对多层电磁弹性圆柱壳内波的轴向传播进行了分析。根据柱坐标系下电磁弹性多层结构的几何方程、平衡方程和本构方程,推导出了两个层间变量所满足的状态方程。通过状态方程的解和层间变量连续性条件,得到了多层圆柱体内外表面层间变量的传递关系。最后利用边界条件,导出了波在传播时所满足的频散方程,并求得该结构的模态参数。以一个三层的压电/压磁材料组成的柱壳结构作为数值算例,计算出波在其中轴向传播时的频散关系和模态参数,并对计算结果进行了分析。     

亚临界雷诺数下圆柱绕流的大涡模拟

本文应用Smagorinsky涡粘性模式和二阶精度的有限体积法对圆柱绕流的流场进行大涡模拟．求解了非正交曲线坐标系下的N-S方程,对雷诺数为100和20000的工况进行了计算．计算结果与实验及动力涡粘性模式的结果进行了比较,表明计算对于层流及高亚临界雷诺数的湍流流动是合理的     

Regimes of vortex shedding from an in-line oscillating circular cylinder in the uniform flow

A finite volume method for the time dependent viscous incompressible flow around an in-line oscillating circular cylinder at Reynolds number of 200, 855 is presented in this paper. The Navier-Stokes equations in a finite volume form are solved with a moving grid system, based on a time dependent coordinate transformation. To investigate the vortex-shedding characteristics behind the circular cylinder and the effects of Reynolds number and other non-dimensional parameters such as reduced amplitude and reduced frequency， several numerical schemes have been tested with different amplitude and frequency close to Sto and a harmonic at each Reynolds number. Present numerical results indicate several types of vortex shedding mode which is known mainly depending on the reduced frequency and also the reduced amplitude, which is called synchronization or lock-on.     

横观各向同性圆柱体自由振动的弹性力学解

本文由横观各向同性的弹性力学方程出发，研究有限长圆柱体的自由振动问题。利用文献「１」的通解，将位移分量和应力分量分别表达成傅里叶－塞尔级数和双曲－贝塞尔级数的形式。通过边界条件和级数的正交关系，得到关于有限长圆柱自由振动频率的特征方程。利用数值方法求解特征根，从而得到圆柱体三维振动的自振频率。     

线性强化材料厚壁圆筒的统一极限分析

运用统一强度理论对承受内压的拉压屈服强度不同的线性强化材料的厚壁圆筒进行了极限载荷分析，得到了适用于多种材料的厚壁圆筒极限载荷的统一解析式．     

Unsteady interaction of shock wave diffracting around a circular cylinder in air

The reflection and diffraction of a planar shock wave around a circular cylinder are a typical problem of the complex nonlinear shock wave phenomena in literature. It has long been studied experimentally, analytically as well as numerically. Takayama in 1987 obtained clear experimental pictures of isopycnics in shock tube under the condition that the impinging shock wave propagates as far as 3 diameters away from the cylinder. To know more completely the whole unsteady process, it is desirable to get experimental results in a region which is more than 10 diameters away from the cylinder. This is what has been done in this paper by using the pulsed laser holographic interferometry for several shock Mach numbers of the impinging shock. Results for several moments are shown, giving more knowledge about the whole unsteady flow field. This is useful for a reliable and complete understanding of the changing force acting on the cylinder, and provides interesting data to check the performance of many recently developed high resolution numerical methods for unsteady shock wave calculation. The project suported partially by National Natural Science Foundation of China     

Dissipative Heating of a Viscoelastic Cylinder under a Load Steadily Moving over Its Surface

The Fourier method is used to find the analytical solutions to two-dimensional quasistatic problems of stationary polyharmonic vibrations and dissipative heating of a linearly viscoelastic cylinder. The influence of the cylinder thickness and the width of the loading area on the thermomechanical state of the cylinder is studied based on numerical data__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 23–32, February 2005.